Lightning, Brownouts, and Your Server: A Florida Guide to UPS Protection

From the archive: this article was written in 2014 and reflects the technology and threats of that time. For current advice, see our latest articles or ask us directly.

Anyone who has spent a summer in Tampa Bay knows the pattern. Clear skies at lunch, a wall of dark clouds by three o'clock, a crack of lightning close enough to rattle the windows, and the lights blink. Maybe they come right back. Maybe they flicker a few more times. Your coffee maker shrugs it off. Your server may not.

Florida is famous for lightning, and our rainy season is just about to start, with hurricane season officially opening June 1. That makes late May a good time to look at the unglamorous box sitting under or beside your server: the uninterruptible power supply, or UPS. If you do not have one, this post is for you. If you do, it may be for you even more.

Why power problems hurt computers

A full outage is the obvious danger, but it is not the only one. Computers are sensitive to several kinds of power trouble:

  • Surges and spikes — sudden jumps in voltage, often from nearby lightning or the utility switching lines. These can damage power supplies and circuit boards.
  • Brownouts and sags — voltage dropping below normal, common during heavy load on hot afternoons. These can cause random reboots and strain equipment.
  • Blackouts — power gone entirely, from a second to several days.
  • Flickers — power dropping and returning several times in quick succession, which is especially hard on hard drives and databases.

The real damage from a sudden power loss is often not to the hardware but to the data. A server that loses power mid-write can end up with a corrupted database, a damaged mail store, or a file system that needs hours of repair. For a practice management system or accounting database, that can mean a very long morning.

What a UPS actually does

A UPS is a battery with brains. When the power from the wall misbehaves, the UPS takes over, feeding clean power to your equipment for a limited time. That time is not meant to keep you running all afternoon. Its job is to ride through short blips and, during a longer outage, give your equipment enough time to shut down properly.

There are a few types. The inexpensive "standby" units are fine for a single desktop. For servers and network gear, look for a line-interactive unit, which corrects brownouts without draining the battery, or an online (double-conversion) unit, which feeds equipment from the battery full-time and provides the cleanest power. Online units cost more but are worth considering if your building's power is particularly rough.

Sizing it right

Buying a UPS by price or by whatever the store had on the shelf is how businesses end up with a unit that cannot handle the load. A few guidelines:

  • Add up what it needs to power. The server, plus the equipment that makes the server useful: your firewall, network switch, and internet modem. Without those, the server stays up but no one can reach it.
  • Check watts, not just VA. UPS units list two ratings. Make sure your total load in watts is comfortably below the unit's watt rating — aim to use no more than about two-thirds of its capacity.
  • Decide how much runtime you need. Most small offices need ten to fifteen minutes: enough to ride out short outages and still shut down cleanly. Longer runtime means a larger unit or extra battery packs.
  • Leave room to grow. Servers get added. Switches get bigger.

Keep laser printers and space heaters off the UPS. They draw huge bursts of power and can overload it.

Graceful shutdown: the step most people skip

Here is the scenario we often see. The office has a UPS. The power goes out at 7 p.m. after everyone has left. The UPS dutifully runs the server for fifteen minutes, the battery dies, and the server crashes hard anyway. The UPS only delayed the problem.

The fix is to connect the UPS to the server with the included USB or network cable and install the manufacturer's management software. When the battery gets low, the software tells the server to save its work and shut down properly. If you run several servers or a virtualization host, a network management card lets one UPS coordinate an orderly shutdown of everything. Test it. Unplug the UPS from the wall on a Friday afternoon and confirm the server actually shuts itself down.

Surge protection and lightning

A good UPS includes surge protection, but lightning finds other ways in. Phone lines, cable modem connections, and network cables running between buildings can all carry a surge straight into your equipment. Use surge protection on those lines too, and make sure your building's electrical grounding is sound. A whole-building surge protector at the electrical panel is a worthwhile investment in lightning-heavy areas like ours.

And to be clear: no surge protector guarantees survival against a direct strike. That is one of many reasons backups belong off-site as well as on-site.

Batteries wear out

UPS batteries typically last about three to five years, and less in a hot closet. Florida server closets are often hot closets. A UPS with a worn-out battery looks perfectly healthy until the moment you need it, when it drops the load instantly. Most units have a self-test and a battery-replace light; check them, note the installation date on the unit, and budget for replacements.

When a generator makes sense

If your business cannot stop working during a multi-day outage — a medical office, a restaurant with inventory to protect, a business that serves customers after a storm — a generator may be worth considering. A UPS and generator work together: the UPS bridges the few seconds until the generator starts, and the generator carries the load from there. Some generators produce power that sensitive equipment does not like, which is another reason to keep the UPS in the chain.

Your pre-storm-season checklist

  1. Confirm your server, firewall, switch, and modem are all on a UPS.
  2. Check the UPS load and runtime on its display or software.
  3. Install and test automatic shutdown software.
  4. Check the battery age and replace anything over three or four years old.
  5. Add surge protection to phone, cable, and outdoor network lines.
  6. Make sure a current backup exists somewhere other than your office.

Power protection is one of those things nobody thinks about until the afternoon it matters. If you would like a second set of eyes on your setup before the storms settle in, our server administration team can review your UPS, shutdown configuration, and backups. Reach us at info@pinellasit.com or through our contact form.

Need help with this?

Talk to a local IT team that has supported businesses across Pinellas & Pasco County since 2010.

Get a Free Consultation Free Security Assessment