Wi-Fi standards come with some of the least friendly names in technology. 802.11b, 802.11g, 802.11n, and now 802.11ac. Behind the alphabet soup, though, the newest one is a real step forward, and it is starting to show up in the gear people are buying right now. Some of this year's new laptops and high-end smartphones already include it, and the major networking vendors are rolling out 802.11ac access points.
So is it time to rip out your office wireless? Probably not today. But if you are planning a Wi-Fi upgrade in the next year or two, 802.11ac should be part of the conversation. Here is what you need to know.
What 802.11ac is
802.11ac is the successor to 802.11n, which most business networks use today. The standard is still being finalized, but the Wi-Fi Alliance has begun certifying products, so devices from different manufacturers are designed to work together. The headline improvements:
- Much higher speeds. First-generation 802.11ac gear can reach theoretical speeds of over a gigabit per second, several times faster than typical 802.11n.
- Wider channels. It uses larger slices of the airwaves to move more data at once.
- Beamforming. Access points can focus their signal toward the devices using them, instead of broadcasting equally in all directions.
- Better handling of many devices. Faster transmissions mean each device spends less time on the air, freeing it up for everyone else.
A word of caution: those theoretical numbers are measured in a lab. In a real office, with walls, filing cabinets, and a dozen phones competing for airtime, you will see a fraction of that. It will still be noticeably faster, but do not expect gigabit to every desk.
Why 5 GHz matters
Wi-Fi uses two main frequency bands: 2.4 GHz and 5 GHz. The 2.4 GHz band is the old, crowded neighborhood. It is shared with cordless phones, microwaves, Bluetooth, baby monitors, and every neighbor's router. In a strip center or office park, it is often packed.
802.11ac works only in the 5 GHz band. That is good news: 5 GHz has many more channels and far less interference. The trade-off is range. 5 GHz signals do not travel as far or push through walls as well, especially concrete block, which is common in Florida construction. That means an 802.11ac network often needs access points placed a bit closer together than an older 2.4 GHz network.
802.11ac access points still include a 2.4 GHz radio for older devices, so nothing in your office gets left behind.
Consumer routers vs. business-grade gear
You can buy an "AC" router at an electronics store today for a reasonable price. For a home, that may be perfectly fine. For a business, there is more to Wi-Fi than raw speed:
- Central management. Business access points are configured and monitored together, so settings stay consistent and problems are visible.
- Seamless roaming. Laptops and phones move between access points as people walk around, instead of clinging to a weak signal.
- Separate guest networks. Customers and visitors get internet access without touching your business systems.
- Security features. Support for WPA2-Enterprise, where each person logs in with their own credentials instead of one shared password.
- Power over Ethernet. Ceiling-mounted access points get power and data over a single cable.
- Longer support. Firmware updates and warranties built for years of use.
A consumer router sitting on a shelf in the back office is often the reason the conference room has no signal.
Things to check before you upgrade
New access points do not live in isolation. Before you buy, look at:
- Your switches. Faster access points need gigabit switch ports behind them. Some 802.11ac models also need more power than older Power over Ethernet switches can supply.
- Your internet connection. If your internet line is the bottleneck, faster Wi-Fi will not make websites load faster. It helps most with moving files around inside the office.
- Your devices. An 802.11ac access point only delivers 802.11ac speeds to devices that support it. Most laptops and phones in your office today do not yet.
- Coverage. A proper site survey shows where signal is weak and how many access points you actually need.
When to upgrade
Our general advice for the rest of 2013:
- If your current 802.11n network works well, there is no urgency. Let the standard mature, let prices come down, and plan an upgrade as your devices catch up.
- If you are still on 802.11g gear, or relying on consumer routers, it is time. And if you are buying new access points anyway, dual-band 802.11ac models are worth serious consideration since they will serve you for years.
- If you are building out a new office, design for 802.11ac from day one: plan the cabling, the ceiling locations, and gigabit switching now.
- If Wi-Fi is central to how you serve customers, such as a restaurant, hotel, clinic waiting room, or event space, the extra capacity may pay off sooner.
Your Wi-Fi checklist
- Find out what access points you have and how old they are.
- Note where people complain about slow or dropped Wi-Fi.
- Check whether your switches are gigabit and can power newer access points.
- Make sure your wireless is using WPA2 security, not the old WEP or an open network.
- Separate guest Wi-Fi from your business network.
- If you are due for an upgrade, budget for business-grade, dual-band access points.
802.11ac is a genuine improvement, and in a couple of years it will simply be how Wi-Fi works. The smart move is to plan for it rather than chase it. If you would like help figuring out whether your office network is ready, or what a sensible upgrade would look like, email us at info@pinellasit.com or use our contact form.
